Related Experiment Video
Updated: Jun 7, 2026
07:55
High-speed Continuous-wave Stimulated Brillouin Scattering Spectrometer for Material Analysis
Published on: September 22, 2017
Multiple-beam wedge-plate shear interferometer for collimation testing
Applied Optics
|November 2, 2010
Abstract:
We describe a modification of the wedge-plate shear interferometer for collimation testing. The surface of the wedge plate is coated to increase the reflectivity such that multiple-beam interference takes place resulting in sharp fringes. In addition to sharpening the fringes also tend to split when the test beam is noncollimated. This splitting has been used as a test criterion for collimation testing. Experimental results are presented.
More Related Videos
Related Concept Videos
01:16Shear on the Horizontal Face of a Beam Element
To understand shear on the flat side of a prismatic beam element, consider the vertical and horizontal shearing forces, and the normal forces, acting on the element. The element's upper (U) and lower (L) sections, which are divided by the beam's neutral axis, are examined. The equilibrium of these forces is determined by applying the equilibrium equation, which helps identify the horizontal shearing force. This force is directly related to the bending moments and the cross-section's first...
01:14Shearing Stresses in a Beam: Problem Solving
A cantilever beam with a rectangular cross-section under distributed and point loads experiences shearing stresses. The analysis begins by identifying the loads acting on the beam. Then, the reactions at the beam's fixed end are calculated using equilibrium equations. The vertical reaction is a combination of the distributed and point loads, while the moment reaction is the sum of their moments. The shear force distribution along the beam, resulting from these loads, is established by creating...