Related Experiment Video
Updated: Jun 7, 2026

08:48
Demonstration of Spin-Multiplexed and Direction-Multiplexed All-Dielectric Visible Metaholograms
Published on: September 25, 2020
Artistic effect and application of moireé patterns in security holograms
Applied Optics
|November 6, 2010
Abstract:
Using a special holographic technique, moiré patterns can be recorded with a horizontal parallax, thus producing a fascinating artistic effect. With special characteristics, holographic moiré patterns can be used as secret codes in security holograms for different security purposes. Aremarkable anticounterfeit effect has been achieved by using this kind of security hologram to protect famous high-quality products. The technique used for recording moiré patterns is described, and sample holograms are shown.
Related Concept Videos
Masking and Demasking Agents
EDTA titrations may necessitate masking and demasking agents to temporarily protect a particular metal ion in a mixture from the EDTA reaction. These agents facilitate the sequential analysis of the metal ions by forming stable complexes with some—but not all—metal ions during certain steps.
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on the metal...
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on the metal...
Aliasing
Accurate signal sampling and reconstruction are crucial in various signal-processing applications. A time-domain signal's spectrum can be revealed using its Fourier transform. When this signal is sampled at a specific frequency, it results in multiple scaled replicas of the original spectrum in the frequency domain. The spacing of these replicas is determined by the sampling frequency.
If the sampling frequency is below the Nyquist rate, these replicas overlap, preventing the original signal...
If the sampling frequency is below the Nyquist rate, these replicas overlap, preventing the original signal...

