Related Experiment Video
Updated: May 30, 2026

Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015
How good can monolayer MoS₂ transistors be?
Youngki Yoon1, Kartik Ganapathi, Sayeef Salahuddin
1Department of Electrical Engineering and Computer Sciences, University of California, Berkeley, California 94720, United States.
Abstract:
Monolayer molybdenum disulfide (MoS(2)), unlike its bulk form, is a direct band gap semiconductor with a band gap of 1.8 eV. Recently, field-effect transistors have been demonstrated experimentally using a mechanically exfoliated MoS(2) monolayer, showing promising potential for next generation electronics. Here we project the ultimate performance limit of MoS(2) transistors by using nonequilibrium Green's function based quantum transport simulations. Our simulation results show that the strength of MoS(2) transistors lies in large ON-OFF current ratio (>10(10)), immunity to short channel effects (drain-induced barrier lowering ∼10 mV/V), and abrupt switching (subthreshold swing as low as 60 mV/decade). Our comparison of monolayer MoS(2) transistors to the state-of-the-art III-V materials based transistors, reveals that while MoS(2) transistors may not be ideal for high-performance applications due to heavier electron effective mass (m = 0.45 m(0)) and a lower mobility, they can be an attractive alternative for low power applications thanks to the large band gap and the excellent electrostatic integrity inherent in a two-dimensional system.
More Related Videos
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable quicker...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET Amplifiers

