Related Experiment Video
Updated: May 30, 2026

Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells
Published on: November 5, 2014
A carbon nanotube gated carbon nanotube transistor with 5 ps gate delay
J Svensson1, Yu Tarakanov, D S Lee
1Department of Physics, University of Gothenburg, SE-41296 Gothenburg, Sweden.
Abstract:
Semiconducting carbon nanotubes (CNTs) are attractive as channel material for field-effect transistors due to their high carrier mobility. In this paper we show that a local CNT gate can provide a significant improvement in the subthreshold slope of a CNT transistor compared to back gate switching and provide gate delays as low as 5 ps. The CNT gated CNT transistor devices are fabricated using a two-step chemical vapour deposition technique. The measured transfer characteristics are in very good agreement with theoretical modelling results that provide confirmation of the operating principle of the transistors. Gate delays below 2 ps should be readily achievable by reducing the thickness of the gate dielectric.
More Related Videos
12:20Fabrication of Carbon Nanotube High-Frequency Nanoelectronic Biosensor for Sensing in High Ionic Strength Solutions
Published on: July 22, 2013
09:14Flow-assisted Dielectrophoresis: A Low Cost Method for the Fabrication of High Performance Solution-processable Nanowire Devices
Published on: December 7, 2017
Related Concept Videos
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable quicker...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity arises...
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...