Related Experiment Video
Updated: May 30, 2026
A Simple, Low-cost, and Robust System to Measure the Volume of Hydrogen Evolved by Chemical Reactions with Aqueous Solutions
Published on: August 17, 2016
Ti-doped LiAlH4 for hydrogen storage: synthesis, catalyst loading and cycling performance
Xiangfeng Liu1, Henrietta W Langmi, Shane D Beattie
1Department of Chemistry, University of New Brunswick, P.O. Box 4400, Fredericton, New Brunswick E3B 5A3, Canada.
Abstract:
The direct synthesis of LiAlH(4) from commercially available LiH and Al powders in the presence of TiCl(3) and Me(2)O has been achieved for the first time. The effects of TiCl(3) loadings (Ti/Al = 0, 0.01, 0.05, 0.2, 0.5, 1.0 and 2.0%) and various other additives (TiCl(3)/Al(2)O(3), metallic Ti, Nb(2)O(5), and NbCl(5)) on the formation and stability of LiAlH(4) have been systematically investigated. The yield of LiAlH(4) initially increases, and then decreases, with increasing TiCl(3) loadings. LiH + Al → LiAlH(4) yields above 95% were obtained when the molar ratios of Ti/Al were 0.05 and 0.2%. In the presence of a very tiny amount of TiCl(3) (Ti/Al = 0.01%), LiAlH(4) is still generated, but the yield is lower. In the complete absence of TiCl(3), LiAlH(4) does not form. Addition of metallic Ti, Nb(2)O(5), and NbCl(5) to commercial LiH and Al does not result in the formation of LiAlH(4). Preliminary tests show that TiCl(3)-doped LiAlH(4) can be cycled, making it a suitable candidate for hydrogen storage.
More Related Videos
Related Concept Videos
01:19Acid Halides to Alcohols: LiAlH4 Reduction
The mechanism proceeds in three steps. First, the nucleophilic hydride ion attacks the carbonyl carbon of the acid halide to form a tetrahedral intermediate. Next, the carbonyl group is re-formed, and the halide ion departs as a leaving group, generating an aldehyde. A second nucleophilic attack by the hydride yields an alkoxide ion, which, upon protonation, gives a primary alcohol as...
02:17Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...