Related Experiment Video
Updated: May 24, 2026

Analysis of Volatile and Oxidation Sensitive Compounds Using a Cold Inlet System and Electron Impact Mass Spectrometry
Published on: September 5, 2014
Liquid chromatography-flame ionisation detection using a nebuliser/spray chamber interface. Part 1. Design and
Erepamowei Young1, Roger M Smith, Barry L Sharp
1Department of Chemistry, Loughborough University, Loughborough, Leicestershire, LE11 3TU, UK.
Abstract:
A nebuliser and spray chamber have been used to link a flow injection analyser to a flame ionisation detector, with the potential for the combination to be used as a universal detector for liquid chromatography. The hydrogen and air flows were adjusted to achieve a stable system. The detector responded to both volatile and involatile analytes and to compounds with and without chromophores, including alkanes, alkanols, aromatic amides and acids, phenols, amino-acids and carbohydrates and gave a linear response for many analytes. However, for involatile polar analytes it was necessary to add traces of acid or salt to the carrier stream to obtain a linear response.
Related Concept Videos
Gas Chromatography: Types of Detectors-II
High-Performance Liquid Chromatography: Instrumentation
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Flame Photometry: Overview
High-Performance Liquid Chromatography: Elution Process
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...
