Related Experiment Video
Updated: May 22, 2026

Monolayer Contact Doping of Silicon Surfaces and Nanowires Using Organophosphorus Compounds
Published on: December 2, 2013
Temperature-dependent nonradiative recombination processes in GaN-based nanowire white-light-emitting diodes on
Hieu Pham Trung Nguyen1, Mehrdad Djavid, Kai Cui
1Department of Electrical and Computer Engineering, McGill University, 3480 University Street, Montreal, QC, H3A 2A7, Canada.
Abstract:
In this paper, we have performed a detailed investigation of the temperature- and current-dependent emission characteristics of nanowire light-emitting diodes, wherein InGaN/GaN dot-in-a-wire nanoscale heterostructures and a p-doped AlGaN electron blocking layer are incorporated in the device's active region to achieve white-light emission and to prevent electron overflow, respectively. Through these studies, the Auger coefficient is estimated to be in the range of ∼10(-34) cm(6) s(-1) or less, which is nearly four orders of magnitude smaller than the commonly reported values of planar InGaN/GaN heterostructures, suggesting Auger recombination plays an essentially negligible role in the performance of GaN-based nanowire light-emitting diodes. It is observed, however, that the performance of such nanowire LEDs suffers severely from Shockley-Read-Hall recombination, which can account for nearly 40% of the total carrier recombination under moderate injection conditions (∼100 A cm(-2)) at room temperature. The Shockley-Read-Hall nonradiative lifetime is estimated to be in the range of a few nanoseconds at room temperature, which correlates well with the surface recombination velocity of GaN and the wire diameters used in this experiment.
More Related Videos
06:57Theoretical Calculation and Experimental Verification for Dislocation Reduction in Germanium Epitaxial Layers with Semicylindrical Voids on Silicon
Published on: July 17, 2020
11:30Recombination Dynamics in Thin-film Photovoltaic Materials via Time-resolved Microwave Conductivity
Published on: March 6, 2017
Related Concept Videos
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...
Types of Semiconductors