Modification of anodised aluminium surfaces using a picosecond fibre laser for printing applications

The use of an ultrafast fibre laser at a wavelength of 1064 nm has allowed the surface modification of anodised aluminium plates coated with a 2 micron thick anodised layer for potential industrial applications. The micro- and nano-scale structuring of the anodised aluminium using picosecond pulses of approximately 25 ps duration at 200 kHz repetition rate was investigated. The interaction of the laser with the substrate created a hydrophilic surface, giving a contact angle of less than 10 degrees. On examination under a Scanning Electron Microscope (SEM), a morphology created due to laser induced spallation was observed. It has been found that these laser processed hydrophilic surfaces revert to a hydrophobic state with time. This has potential for application in the printing industry and offers reusability and sustainability of the process materials. This has been confirmed in initial trials.