Related Experiment Video
Updated: May 18, 2026

Fabrication of Magnetic Nanostructures on Silicon Nitride Membranes for Magnetic Vortex Studies Using Transmission Microscopy Techniques
Published on: July 2, 2018
High performance magnetoimpedance in FeNi/Ti nanostructured multilayers with opened magnetic flux
E Fernández1, A V Svalov, A García-Arribas
1Departamento de Electricidad y Electrónica, Universidad del País Vasco UPV-EHU, 48940 Leioa, Spain.
Abstract:
Magnetic [FeNi (170 nm)/Ti (6 nm)]3/Cu (L(cu) = 250 or 500 nm)/[Ti (6 nm)/FeNi (170 nm)]3 multilayers were designed with focus on high frequency applications. They were deposited onto glass or a microfluidic system compatible flexible Ciclo Olefin Copolymer substrate and comparatively tested. A maximum sensitivity for the total impedance of 110%/Oe was obtained for a driving current frequency of 30 MHz for [FeNi/Ti]3/Cu (L(cu) = 500 nm)/[Ti/FeNi]3 multilayers deposited onto a glass substrate and 45%/Oe for a driving current frequency of 65 MHz for the same multilayers deposited onto the flexible polymer substrate, a very promising result for applications. The possibility of using flexible substrate/[FeNi/Ti],/Cu/[Ti/FeNi]3 multilayers as MI pressure-sensitive elements was also demonstrated.
Related Concept Videos
Biasing of FET
In an N-channel JFET, the structure consists of N-type material forming the channel on a P-type substrate, with the gate...
Ferromagnetism
Magnetic Flux
Suppose a surface is divided into elements of area dA. For each element, the component of the magnetic field that is normal to the...
Paramagnetism
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no current...

