Related Experiment Video
Updated: May 15, 2026

Biomechanical Characterization of Human Soft Tissues Using Indentation and Tensile Testing
Published on: December 13, 2016
Full-field bulge test for planar anisotropic tissues: part I--experimental methods applied to human skin tissue
Theresa K Tonge1, Lorre S Atlan, Liming M Voo
1Department of Mechanical Engineering, Johns Hopkins University, Baltimore, MD 21218, USA. tkoys1@jhu.edu
Abstract:
The nonlinear anisotropic properties of human skin tissue were investigated using bulge testing. Full-field displacement data were obtained during testing of human skin tissues procured from the lower back of post-mortem human subjects using 3-D digital image correlation. To measure anisotropy, the dominant fiber direction of the tissue was determined from the deformed geometry of the specimen. Local strains and stress resultants were calculated along both the dominant fiber direction and the perpendicular direction. Variation in anisotropy and stiffness was observed between specimens. The use of stress resultants rather than the membrane stress approximation accounted for bending effects, which are significant for a thick nonlinear tissue. Of the six specimens tested, it was observed that specimens from older donors exhibited a stiffer and more isotropic response than those from younger donors. It was seen that the mechanical response of the tissue was negligibly impacted by preconditioning or the ambient humidity. The methods presented in this work for skin tissue are sufficiently general to be applied to other planar tissues, such as pericardium, gastrointestinal tissue, and fetal membranes. The stress resultant-stretch relations will be used in a companion paper to obtain material parameters for a nonlinear anisotropic hyperelastic model.
More Related Videos
14:14Quantification of Strain in a Porcine Model of Skin Expansion Using Multi-View Stereo and Isogeometric Kinematics
Published on: April 16, 2017
07:34Layer Microdissection of Tricuspid Valve Leaflets for Biaxial Mechanical Characterization and Microstructural Quantification
Published on: February 10, 2022