Related Experiment Video
Updated: May 12, 2026

Fabrication and Characterization of Superconducting Resonators
Published on: May 21, 2016
Study of coupling loss on strongly-coupled, ultra compact microring resonators
Chih-Wei Tseng1, Chih-Wei Tsai, Kaung-Cheng Lin
1Institute of Photonics Technologies, National Tsing Hua University, Hsinchu, Taiwan.
Abstract:
Small-radius microring resonators with large free spectral range (FSR) are of great interest for optical communication and optical interconnect applications. The resonator loss of a waveguide-coupled ring resonator, if the gap width between the microring and the bus waveguide is extremely small, can be significantly influenced by the coupling loss which corresponds to the microring operated in a strong coupling regime. This effect is particularly prominent for small radius microrings. We have studied the coupling loss with respect to the gap width on a waveguide-coupled microring both experimentally and theoretically, using two-dimensional (2D) finite difference time domain (FDTD) and effective index method (EIM).The coupling loss was confirmed by measuring transmission spectra of Si microring filters fabricated on silicon-on-insulator (SOI) wafers. Our experimental data show that the ring loss increases rapidly as the coupling gap decreases to less than 200 nm. The measured results show that the ring loss of a silicon microring with a radius of 2.75 μm is around 0.01382 dB/circumference as the gap width is greater than 325 nm, referred to as the intrinsic ring loss. However, for a smaller gap of 150 nm, the loss of the microring increases to 0.07084dB/circumference. The added ring loss is attributed to the coupling loss at small coupling gap for small radius ring.
Related Concept Videos
Characteristics of Series Resonant Circuit
¹H NMR: Long-Range Coupling
In alkenes, spin information is communicated via σ–π overlap, as seen in allylic (four-bond) and homoallylic (five-bond) couplings. These coupling interactions are stronger when the σ bond is parallel to the alkene π orbitals.
Double Resonance Techniques: Overview
Spin decoupling is usually achieved by...
Spin–Spin Coupling Constant: Overview
Qualitatively, any spin plus-half nucleus polarizes the spins of its electrons to the minus-half state. Consequently, the paired electron in the hydrogen–carbon bond must have a...
Spin–Spin Coupling: Two-Bond Coupling (Geminal Coupling)
The central atom need not be NMR-active because its electrons are affected by the electron polarization of the spin-active atoms. However, spin information is transmitted less effectively than in one-bond coupling, and 2J values are usually weaker than 1J values. The energy of...
Mesh Analysis for AC Circuits
The process of harmonizing these impedances begins with a clear understanding of the input and output signals. Once these signals are known, the...

