Related Experiment Video
Updated: May 9, 2026

Construction of a Wireless-Enabled Endoscopically Implantable Sensor for pH Monitoring with Zero-Bias Schottky Diode-based Receiver
Published on: August 27, 2021
A high-efficiency low-voltage CMOS rectifier for harvesting energy in implantable devices
S Saeid Hashemi1, Mohamad Sawan, Yvon Savaria
1Electrical Engineering Department, Polystim Neurotechnologies Laboratory, Ecole Polytechnique de Montreal, Montreal, QC H3C 3A7, Canada. saeid.hashemi@polymtl.ca
Abstract:
We present, in this paper, a new full-wave CMOS rectifier dedicated for wirelessly-powered low-voltage biomedical implants. It uses bootstrapped capacitors to reduce the effective threshold voltage of selected MOS switches. It achieves a significant increase in its overall power efficiency and low voltage-drop. Therefore, the rectifier is good for applications with low-voltage power supplies and large load current. The rectifier topology does not require complex circuit design. The highest voltages available in the circuit are used to drive the gates of selected transistors in order to reduce leakage current and to lower their channel on-resistance, while having high transconductance. The proposed rectifier was fabricated using the standard TSMC 0.18 μm CMOS process. When connected to a sinusoidal source of 3.3 V peak amplitude, it allows improving the overall power efficiency by 11% compared to the best recently published results given by a gate cross-coupled-based structure.
Related Concept Videos
Bridge rectifier
Operationally, the bridge rectifier allows current flow through two of its diodes during each...
Full wave rectifier
Half wave rectifier
Voltage Doubler Circuit

