Related Experiment Video
Updated: May 9, 2026

Waste Water Derived Electroactive Microbial Biofilms: Growth, Maintenance, and Basic Characterization
Published on: December 29, 2013
Effect of pH and distance between electrodes on the performance of a sediment microbial fuel cell
T K Sajana1, M M Ghangrekar, A Mitra
1Department of Agricultural and Food Engineering, Indian Institute of Technology, Kharagpur, India.
Abstract:
The performance of three sediment microbial fuel cells (SMFCs) was evaluated at different feed water pH and electrode spacing for chemical oxygen demand (COD) removal, total nitrogen (TN) removal, and power density; while offering in situ remediation of aquaculture pond water. SMFC-A was operated at the feed water pH of 6.5 and spacing between the electrodes of 100 cm. SMFC-B and SMFC-C were operated at feed water pHs of 8.5 and 6.5, respectively, and distance between electrodes of 50 cm. The anode and cathode were connected with concealed copper wire through an external load of 100 Ω. The average amount of total COD removal rate and TN removal rate, per unit area of cathode, were 1.72 ± 0.06 and 0.021 ± 0.007 g/m(2) d in SMFC-A, 1.03 ± 0.08 and 0.024 ± 0.005 g/m(2) d in SMFC-B, and 1.14 ± 0.01 and 0.017 ± 0.001 g/m(2) d in SMFC-C, respectively. SMFC-A, operated with higher distance between electrodes, demonstrated better removal of organic matter and highest open circuit voltage of 0.903 V. SMFCs with less feed pH (6.5) gave higher COD removal and feed pH of 8.5 gave higher TN removal. SMFCs operated with lesser distance between electrodes gave higher power density.
Related Concept Videos
Processes at Electrodes
The Electrical Double Layer
Voltammetry: Factors Affecting Measurements
Concentration Cells
Consider the following voltaic cell:
Deep Sea Microbial Ecology
Marine Microbial Ecology

