Related Experiment Video

Updated: May 7, 2026

A Fabrication Method for Highly Stretchable Conductors with Silver Nanowires
07:50

A Fabrication Method for Highly Stretchable Conductors with Silver Nanowires

Published on: January 21, 2016

Functional finishes of stretch cotton fabrics

N A Ibrahim1, A Amr, B M Eid

  • 1Textile Research Division, National Research Centre, Dokki, Cairo, Egypt.

Carbohydrate Polymers
|September 24, 2013
PubMed

Keywords:
Anti-bacterialBi-or multi-functional finishCotton/spandex blendCross-linkerMicrowave fixationNano-materialsSelf-cleaningSilicone-softenerUV-protectionWater and oil repellentWeave-structure

More Related Videos

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric07:48

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric

Published on: January 29, 2020

Material Formation of Recombinant Spider Silks through Aqueous Solvation using Heat and Pressure10:26

Material Formation of Recombinant Spider Silks through Aqueous Solvation using Heat and Pressure

Published on: May 6, 2019

Related Concept Videos

Types of Step-Growth Polymers: Polyesters01:20

Types of Step-Growth Polymers: Polyesters

The introduction of polyesters has brought major development to the textile industry. The wrinkle-free behavior of polyester blends has eliminated the need for starching and ironing clothes.
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Dense Connective Tissue01:13

Dense Connective Tissue

Dense connective tissue contains more collagen fibers than loose connective tissue. As a consequence, it displays greater resistance to stretching. There are two major categories of dense connective tissue— regular and irregular.
Dense Regular Connective Tissue
In dense regular connective tissue, fibers are arranged parallel to each other, enhancing its tensile strength and resistance to stretching in the direction of the fiber orientations. Ligaments and tendons are made of dense regular...
Elasticity01:12

Elasticity

Elasticity is the ability of an object to withstand the effects of distortion and to return to its original size and shape once the forces causing deformation are removed. When an elastic material deforms under the action of an external force, it experiences internal resistance to the deformation. However, if no external force is applied, it returns to its original state.
The elasticity of an object can be described by a stress-strain curve, which represents the relationship between stress...
Finishing Concrete01:18

Finishing Concrete

Concrete finishing starts immediately after the concrete has been placed and consolidated. The initial step, screeding, involves leveling the concrete surface by removing excess material to flush it with the formwork's top. Following this, bull float or darby are employed to smooth the surface further, effectively lower high spots, fill low areas, and ensure larger aggregate particles are embedded within the concrete. This preparation is critical before the appearance of bleed water, as its...
Stress-Strain Diagram - Ductile Materials01:24

Stress-Strain Diagram - Ductile Materials

The stress-strain relationship in ductile materials such as structural steel or aluminium is intricate and progresses through several stages. When a specimen is loaded, it initially exhibits a linear length increase, depicted by a steep straight line on the stress-strain diagram. It indicates the material is elastically deforming and will return to its original shape once unloaded. However, when a critical stress value is reached, plastic deformation begins. This stage sees substantial...
Residual Stresses01:26

Residual Stresses

Residual stresses reside in a structure even after removing the original stress inducer. This phenomenon often arises from varied plastic deformations across different parts of a structure. Consider a rod stretched beyond its yield point. It will not regain its original length due to permanent deformation. Even after load removal, the rod does not entirely lose stress because of uneven plastic deformations, resulting in residual stresses. The computation of these stresses in structures is...