Related Experiment Video
Updated: May 4, 2026

Ultrasound Velocity Measurement in a Liquid Metal Electrode
Published on: August 5, 2015
On the electronic specific heat of liquid tungsten
1Joint Institute for High Temperatures, Izhorskaya 13, Building 2, Moscow 125412, Russia.
Abstract:
Tungsten foil strip sandwiched between two sapphire plates was rapidly heated by an electrical current pulse so that it experienced a two-fold thermal expansion in less than 400 ns under increasing dynamic pressure. The dependence of density on specific enthalpy and pressure was investigated for liquid tungsten using two essentially different diagnostic techniques. Based on a comparison of the results with each other and literature data the systematic uncertainty of the measurements has been estimated. The dependence of density on specific enthalpy along the isobar P = 0.1 MPa has been determined for the entire liquid range. The data have been used to evaluate the constant volume specific heat of liquid tungsten and the electronic contribution to it. It has been shown that the contribution attains more than 40% of the total value of the specific heat.
Related Concept Videos
Specific Heat
For example, increasing the temperature of one gram of water by 1°C requires one calorie of heat energy and can be written as 1 cal/g-°C, or...
Constant Volume Calorimetry
Quantifying Heat
Heating and Cooling Curves
For instance, the addition of heat raises the temperature of a solid; the amount of heat absorbed depends on the heat capacity of the solid (q = mcsolidΔT). According to thermochemistry, the relation between the amount of heat absorbed or released by a substance,...
Heat Flow and Specific Heat
Heat Capacities of an Ideal Gas III

