Related Experiment Video
Updated: May 3, 2026

Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities
Published on: November 30, 2012
Controling the coupling properties of active ultrahigh-Q WGM microcavities from undercoupling to selective
A Rasoloniaina1, V Huet1, T K N Nguyên1
1FOTON (CNRS-UMR 6082), Université de Rennes I, ENSSAT, 6 rue de Kerampont, CS 80518, 22305 Lannion cedex, France.
Abstract:
Ultrahigh-quality (Q) factor microresonators have a lot of applications in the photonics domain ranging from low-threshold nonlinear optics to integrated optical sensors. Glass-based whispering gallery mode (WGM) microresonators are easy to produce by melting techniques, however they suffer from surface contamination which limits their long-term quality factor to a few 10(8). Here we show that an optical gain provided by erbium ions can compensate for residual losses. Moreover it is possible to control the coupling regime of an ultrahigh Q-factor three port microresonator from undercoupling to spectral selective amplification by changing the pumping rate. The optical characterization method is based on frequency-swept cavity-ring-down-spectroscopy. This method allows the transmission and dispersive properties of perfectly transparent microresonators and intrinsic finesses up to 4.0 × 10(7) to be measured. Finally we characterize a critically coupled fluoride glass WGM microresonator with a diameter of 220 μm and a loaded Q-factor of 5.3 × 10(9) is demonstrated.

