Formation of two-dimensional ZnO nanosheets by rapid thermal oxidation in oxygenated environment

Crystalline 2-D (dimensional) ZnO nanosheets were formed by rapid thermal oxidation of etched Zn foil in oxygen at 300 degrees C and 400 degrees C. Short oxidation time was varied from 10, 20 and 30 min. The morphologies and optical properties of the ZnO nanosheets evolved with the oxidation temperature and time. At 300 degrees C, ZnO nanosheets with thickness ranging from 32 nm to 80 nm were obtained while at 400 degrees C, the thickness of the nanosheets increased from 88 nm to approximately 200 nm after 10 and 30 min of oxidation, respectively. The surface roughness of the ZnO nanosheets and grain size increased with oxidation time and temperature. Photoluminescence of the oxidized samples shows ultraviolet (UV) and visible emissions indicating good crystallinity of ZnO which was further confirmed by high-resolution transmission electron microscope observation of ZnO wurtzite interplanar spacing. Photocatalytic activity of ZnO was also investigated by using degradation of methyl orange (MO) and all the samples exhibit photocatalytic activity. The sample oxidized at 400 degrees C for 10 min show better MO degradation after 2 h of exposure due to higher surface area and better crystallinity of the ZnO nanosheets obtained.