In-line particle holography with an astigmatic beam: setup self-calibration using an "inverse problems" approach

The use of digital in-line holography for the characterization of confined flows in cylindrical geometry confinements (e.g., cylindrical pipe or cylindrical capillaries) is discussed. Due to cylindrical geometry of the walls, the illuminating laser wave can be strongly astigmatic, which renders the use of classical reconstruction techniques impossible. Contrary to plane wave holography setup, the diffraction pattern of the particles strongly depends on the axial distance of the latter to the entry face of the confinement structure. To address this reconstruction issue, we propose to use an "inverse problems" approach. This approach amounts to finding the best match (least squares solution) between a diffraction pattern model and the captured hologram. For this purpose, a direct imaging model for astigmatic holograms, based on the use of transfer matrices, is presented and validated by comparing experimental and simulated holograms. The accuracy of the "inverse problems" reconstruction is then used to calibrate the experimental setup adjustable parameters. Finally, the approach is tested through experimental astigmatic hologram reconstruction, thus paving the way to its use in pipe flow studies.