A comparative study on fabrication of Mn2+ selective polymeric membrane electrode and coated graphite electrode

Poly(vinyl chloride)-based membranes of two ligands 2,4-bis(2-acetoxybenzylamino)-6-phenyl-1,3,5-triazine (L1) and N2,N4-di(cyanoethyl)-2,4-bis(2-acetoxybenzylamino)-6-phenyl-1,3,5-triazine (L2) were fabricated and explored as Mn(2+) ion selective electrodes. The performance of the polymeric membranes electrodes of ionophores with different plasticizers (dibutylphthalate, benzoic acid, o-nitrophenyloctyl ether, 1-chloronapthalene and tri-n-butylphosphate) and anion excluders (sodium tetraphenylborate and potassium tetrakis p-(chloro phenyl)borate) was looked in to and the better results were obtained with the membrane having composition L2: NaTPB: DBP: PVC as 6: 3: 56: 35 (w/w; mg). The coated graphite electrode (CGE) with same composition was also fabricated and investigated as Mn(2+) selective electrode. It was found that CGE showed better response characteristics than PME. The potentiometric response of CGE was independent of pH in the range 3.0-9.0 exhibiting the Nernstian slope 29.5 ± 0.3 mVdecade(-1) of activity and working concentration range 4.1 × 10(-7)-1.0 × 10(-1)mol L(-1) with a limit of detection 6.7 × 10(-8)mol L(-1). The electrode showed a fast response time of 12s with a shelf life of 105 days. The proposed CGE could be successfully used for the determination of Mn(2+) ions in different water, soil, vegetables and medicinal plants also used as an indicator electrode in potentiometric titration with EDTA.