One-step synthesis of Si@C nanoparticles by laser pyrolysis: high-capacity anode material for lithium-ion batteries

Carbon-covered silicon nanoparticles (Si@C) were synthesized for the first time by a one-step continuous process in a novel two stages laser pyrolysis reactor. Crystallized silicon cores formed in a first stage were covered in the second stage by a continuous shell mainly consisting in low organized sp(2) carbon. At the Si/C interface silicon carbide is absent. Moreover, the presence of silicon oxide is reduced compared to materials synthesized in several steps, allowing the use of such material as promising anode material in lithium-ion batteries (LIB). Auger Electron Spectroscopy (AES) analysis of the samples at both SiKLL and SiLVV edges proved the uniformity of the carbon coating. Cyclic voltammetry was used to compare the stability of Si and Si@C active materials. In half-cell configuration, Si@C exhibits a high and stable capacity of 2400 mAh g(-1) at C/10 and up to 500 mAh g(-1) over 500 cycles at 2C. The retention of the capacity is attributed to the protective effect of the carbon shell, which avoids direct contact between the silicon surface and the electrolyte.