Solution-processed solar cells based on inorganic bulk heterojunctions with evident hole contribution to photocurrent...

To develop solution-processed and novel device structures is of great importance for achieving advanced and low-cost solar cells. In this paper, we report the solution-processed solar cells based on inorganic bulk heterojunctions (BHJs) featuring a bulk crystalline Sb2S3 absorbing layer interdigitated with a TiO2 nanoarray as an electron transporter. A solution-processed amorphous-to-crystalline transformation strategy is used for the preparation of Sb2S3/TiO2-BHJs. Steady-state and dynamic results demonstrate that the crystalline structure in the Sb2S3 absorbing layer is crucial for efficient devices, and a better Sb2S3 crystallization favors a higher device performance by increasing the charge collection efficiency for a higher short-circuit current, due to reduced interfacial and bulk charge recombinations, and enhancing the open-circuit voltage and fill factor with the reduced defect states in the Sb2S3 layer as well. Moreover, an evident contribution to photocurrent generation from the photogenerated holes in the Sb2S3 layer is revealed by experimental and simulated dynamic data. These results imply a kind of potential non-excitonic BHJ for energy conversion.