In vitro and in vivo evaluation of a jellyfish valve for practical use

A practical model (Model-1) of a jellyfish valve was developed, which was composed of a valve seat and a flexible membrane. The valve seat has 12 spokes to hold the membrane, and is made of solution-cast polyurethane coated with segmented polyurethane or Cardiothane. The flexible membrane is 200 microns thick, and made of segmented polyurethane or Cardiothane by a casting method. The valves were built into a sac type blood pump. In mock circulation tests, this jellyfish valve revealed performance superior to Bjork-Shiley (B-S) valves. No stagnation point was observed in the flow visualization study, and durability testing is ongoing beyond 7.5 months. The valves were used in animal artificial heart experiments for up to 112 days with good performance. No thrombi were formed on the valve membrane or around the spokes. Although a ring thrombus was observed behind the valve, it would be prevented by perfect adhesion of the valve seat to the blood pump. The plasma free hemoglobin level was less than 2 mg/dl during these experiments. These results suggest that a jellyfish valve (Model-1) is useful in ventricular assist devices, and in short-term bridge use of a total artificial heart.