Impact of Moisture on the Pressure Delivering Potential of Pressure Garments

Pressure garments are the main method of treatment and prophylaxis for hypertrophic burn scars. The pressure they exert on the scarred skin prevents contractures forming, reduces the itchiness and pruritus associated with active hypertrophic scars, and is believed, by many, to hasten normalization of the scar tissue. The pressure exerted is believed to be critical to treatment success and can be predicted based on laboratory measurement of the fabric's tension profile. All previous research on the pressures delivered by pressure garments has been undertaken using dry fabrics in either laboratory or clinical conditions. However, many patients have complained of increased perspiration when wearing pressure garments, and many burn victims live and work in hot conditions where high levels of perspiration may be expected. This article investigated the impact of moisture content on fabric tension and thus the pressure exerting ability of pressure garments. Four different fabrics currently used in the construction of pressure garments were evaluated in seven different states of "wetness" from completely dry to completely saturated in water or artificial perspiration. Standard laboratory methods were used to measure the initial tension in fabrics and the tension after 11 cycles of extension. Pressures that would be exerted by these fabrics were calculated using the Laplace law. The results of this study showed that the tension, and therefore pressure delivering ability, of fabrics used in pressure garments was significantly reduced when they were wet but that the amount or type of "wetness" did not have a significant effect on pressure delivering ability.