Related Experiment Video
Updated: Mar 6, 2026

Fabrication of Schottky Diodes on Zn-polar BeMgZnO/ZnO Heterostructure Grown by Plasma-assisted Molecular Beam Epitaxy
Published on: October 23, 2018
Comparative Study of Antimony Doping Effects on the Performance of Solution-Processed ZIO and ZTO Field-Effect
Jong Han Baek, Hyunju Seol1, Kilwon Cho2
1Department of Electronic Engineering, Hanyang University , Seoul 133-791, South Korea.
Abstract:
ZnO-based oxide films are emerging as high-performance semiconductors for field-effect transistors (FETs) in optoelectronics. Carrier mobility and stability in these FETs are improved by introducing indium (In) and gallium (Ga) cations, respectively. However, the strong trade-off between the mobility and stability, which come from In or Ga incorporation, still limits the widespread use of metal oxide FETs in ultrahigh pixel density and device area-independent flat panel applications. We demonstrated that the incorporation of antimony (Sb) cations in amorphous zinc indium oxide (ZIO) simultaneously enhanced the field-effect mobility (μFET) and electrical stability of the resulting Sb-doped ZIO FETs. The rationale for the unexpected synergic effect was related to the unique electron configuration of Sb5+ ([Kr]4d105s05p0). However, the benefit of Sb doping was not observed in the zinc tin oxide (ZTO) system. All the Sb-doped ZTO FETs suffered from a reduction in μFET and a deterioration of gate bias stress stability with an increase in Sb loading. This can be attributed to the formation of heterogeneous defects due to Sb-induced phase separation and the creation of Sb3+ induced acceptor-like trap states.
More Related Videos
Related Concept Videos
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...

