Improved electroanalytical characteristics for flumetralin determination in the presence of surface active compound

The use of square wave voltammetry (SWV) and square wave adsorptive stripping voltammetry (SWAdSV) in conjunction with a cyclic renewable silver amalgam film electrode for the determination of flumetralin is presented. Poor separation of two overlapped reduction peaks is significantly improved when hexadecyltrimethylammonium bromide is used as a component of the supporting electrolyte solution (together with BR buffer pH 9.5). The SW technique parameters were investigated and found optimal as follows: frequency 50 Hz, amplitude 40 mV, and step potential 5 mV. Accumulation time and potential were studied to select the optimal conditions in adsorptive voltammetry. The analytical curve was linear for the flumetralin concentration range from 1.0 × 10^-6 to 1.0 × 10^-5 mol dm^-3 and from 5.0 × 10^-9 to 1.0 × 10^-7 mol dm^-3 for SWV and SWAdSV, respectively. Detection limit of 6.5 × 10^-10 mol dm^-3 was calculated for accumulation time 60 s at -0.2 V. The repeatability of the method was determined at a flumetralin concentration level equal to 5.0 × 10^-9 mol dm^-3 and expressed as %RSD = 5.0% (n = 6). The proposed method was applied and validated successfully by studying the recovery of herbicide content in spiked environmental samples.