Related Experiment Video
Updated: Feb 27, 2026

Bacteriophage Effectiveness for Biocontrol of Foodborne Pathogens Evaluated via High-Throughput Settings
Published on: August 19, 2021
Thermal and chemical inactivation of Lactobacillus virulent bacteriophage
1Key Laboratory of Dairy Biotechnology and Engineering, Ministry of Education, Inner Mongolia Agricultural University, Hohhot, 010018, P. R. China.
Abstract:
The effect of thermal treatments and several biocides on the viability of Lactobacillus virulent phage P1 was evaluated. Times to achieve 99% inactivation (T99) of phage at different treatment conditions were calculated. The thermal treatments applied were 63, 72, and 90°C in 3 suspension media (de Man, Rogosa, Sharpe broth, reconstituted skim milk, and Tris magnesium gelatin buffer). Phage P1 was completely inactivated in 5 and 10 min at 90 and 72°C, respectively; however, reconstituted skim milk provided better thermal protection at 63°C. When phage P1 was treated with various biocides, 800 mg/L of sodium hypochlorite was required for total inactivation (∼7.3 log reduction) within 60 min, whereas treatment with 100% ethanol resulted in only a ∼4.7 log reduction, and 100% isopropanol resulted in a 5.2-log reduction. Peracetic acid (peroxyacetic acid) at the highest concentration used (0.45%) resulted in only a ∼4.-log reduction of phage within 60 min. The results of this study provide additional information on effective treatments for the eradication of potential phage infections in dairy plants.
More Related Videos
Related Concept Videos
Lytic Cycle of Bacteriophages
Physical Methods for Controlling Microbial Growth: Temperature
Viral Replication: Lysogenic Cycle
Lysogenic Cycle of Bacteriophages
Viral Replication: Lytic Cycle
Methods of Sterilization I: Physical Methods
Steam sterilization uses non-toxic, low-cost moist heat in the form of saturated steam under pressure, which is fast, microbicidal, and sporicidal, and quickly warms and penetrates fabrics. Autoclaves, or steam sterilizers, expose each item to direct steam contact for a predetermined time at the necessary...

