Related Experiment Video
Updated: Feb 26, 2026

Preparation of Large-area Vertical 2D Crystal Hetero-structures Through the Sulfurization of Transition Metal Films for Device Fabrication
Published on: November 28, 2017
Low Variability in Synthetic Monolayer MoS2 Devices
Kirby K H Smithe1, Saurabh V Suryavanshi1, Miguel Muñoz Rojo1
1Department of Electrical Engineering, ‡Department of Materials Science and Engineering, and §Precourt Institute for Energy, Stanford University , Stanford, California 94305, United States.
Abstract:
Despite much interest in applications of two-dimensional (2D) fabrics such as MoS2, to date most studies have focused on single or few devices. Here we examine the variability of hundreds of transistors from monolayer MoS2 synthesized by chemical vapor deposition. Ultraclean fabrication yields low surface roughness of ∼3 Å and surprisingly low variability of key device parameters, considering the atomically thin nature of the material. Threshold voltage variation and very low hysteresis suggest variations in charge density and traps as low as ∼1011 cm-2. Three extraction methods (field-effect, Y-function, and effective mobility) independently reveal mobility from 30 to 45 cm2/V/s (10th to 90th percentile; highest value ∼48 cm2/V/s) across areas >1 cm2. Electrical properties are remarkably immune to the presence of bilayer regions, which cause only small conduction band offsets (∼55 meV) measured by scanning Kelvin probe microscopy, an order of magnitude lower than energy variations in Si films of comparable thickness. Data are also used as inputs to Monte Carlo circuit simulations to understand the effects of material variability on circuit variation. These advances address key missing steps required to scale 2D semiconductors into functional systems.
More Related Videos
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...

