Related Experiment Video

Updated: Feb 25, 2026

Polycrystalline Silicon Thin-film Solar cells with Plasmonic-enhanced Light-trapping
09:32

Polycrystalline Silicon Thin-film Solar cells with Plasmonic-enhanced Light-trapping

Published on: July 2, 2012

19.3K

Optical and Electrical Performance of MOS-Structure Silicon Solar Cells with Antireflective Transparent ITO and

Wen-Jeng Ho1, Ruei-Siang Sue2, Jian-Cheng Lin3

  • 1Department of Electro-Optical Engineering, National Taipei University of Technology, No. 1, Section 3, Zhongxial East Road, Taipei 10608, Taiwan. wjho@ntut.edu.tw.

Materials (Basel, Switzerland)
|August 5, 2017
PubMed

Keywords:
ITO-electrodeMOS-structure solar cellindium nanoparticles (In-NPs)plasmonics

More Related Videos

Developing High Performance GaP/Si Heterojunction Solar Cells10:31

Developing High Performance GaP/Si Heterojunction Solar Cells

Published on: November 16, 2018

8.0K
Integration of Light Trapping Silver Nanostructures in Hydrogenated Microcrystalline Silicon Solar Cells by Transfer Printing08:45

Integration of Light Trapping Silver Nanostructures in Hydrogenated Microcrystalline Silicon Solar Cells by Transfer Printing

Published on: November 9, 2015

8.2K

Related Concept Videos

Biasing of Metal-Semiconductor Junctions01:27

Biasing of Metal-Semiconductor Junctions

Biasing metal-semiconductor junctions involves applying a voltage across the junction. Specifically, the metal is connected to a voltage source, while the semiconductor is grounded. This technique is essential for controlling the direction and magnitude of current flow in electronic devices, including diodes, transistors, and photovoltaic cells.
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
709
P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
1.4K
Biasing of P-N Junction01:16

Biasing of P-N Junction

The operation of a p-n junction diode involves various biasing conditions, including forward bias, reverse bias, and equilibrium.
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
2.2K