Related Experiment Video
Updated: Feb 16, 2026

In Situ Lithiated Reference Electrode: Four Electrode Design for In-operando Impedance Spectroscopy
Published on: September 12, 2018
Spironolactone voltammetric determination on renewable amalgam film electrode
Joanna Smajdor1, Robert Piech1, Beata Paczosa-Bator1
1AGH University of Science and Technology, Faculty of Materials Science and Ceramics, 30-059 Kraków, al. Mickiewicza 30, Poland.
Abstract:
In this study a new high sensitive method of spironolactone (SP) determination is proposed using voltammetric technique. As the working electrode amalgam film silver based electrode (Hg(Ag)FE) was applied, that resulted in obtaining low limit of spironolactone detection, ex. for the preconcentration time 45 s obtained detection limit was 4.7·10-9 mol L-1 (1.96·10-6 g L-1). The linear response of spironolactone signal on mercury film electrode was obtained in the range of concentration from 15·10-9 to 3.0·10-6 mol L-1 and the obtained repeatability measured as RSD was very good, with the value of 2.0% (n = 5; concentration 0.5·10-6 mol L-1). The proposed method was successfully applied and validated by studying the recovery in commercially available pharmaceutical formulations containing known amount of spironolactone.
More Related Videos
Related Concept Videos
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Voltammetric Techniques: Linear-Scan (E vs Time)
Voltammetry: Overview
A voltammetric cell uses three electrodes: a working electrode, a reference electrode, and an auxiliary electrode. The redox reactions occur in the working...
Voltammetric Techniques: Pulse Voltammetry
Voltammetric Techniques: Cyclic Voltammetry
Electrogravimetric Analysis: Overview
To test the completeness of the...

