Approaching the intrinsic quality factor limit for micromechanical bulk acoustic resonators using phononic crystal...

We systematically demonstrate that one-dimensional phononic crystal (1-D PnC) tethers can significantly reduce tether loss in micromechanical resonators to a point where the total energy loss is dominated by intrinsic mechanisms, particularly phonon damping. Multiple silicon resonators are designed, fabricated, and tested to provide comparisons in terms of the number of periods in the PnC and the resonance frequency, as well as a comparison with conventional straight-beam tethers. The product of resonance frequency and measured quality factor (f×Q) is the critical figure of merit, as it is inversely related to the total energy dissipation in a resonator. For a wide range of frequencies, devices with PnC tethers consistently demonstrate higher f×Q values than the best conventional straight-beam tether designs. The f×Q product improves with increasing number of PnC periods, and at a maximum value of 1.2 × 10¹³ Hz, approaches limiting values set by intrinsic material loss mechanisms.