Related Experiment Video
Updated: Feb 10, 2026

Fabrication of Polymer Microspheres for Optical Resonator and Laser Applications
Published on: June 2, 2017
Fabrication of PAA-PETPTA Janus Microspheres with Respiratory Function for Controlled Release of Guests with
Liwei Wang1, Liang Yu2, Changfeng Zeng3
1State Key Laboratory of Materials-Oriented Chemical Engineering and College of Chemical Engineering , Nanjing Tech University , Nanjing 210009 , P. R. China.
Abstract:
Poly(acrylic acid)-poly(ethoxylated trimethylolpropane triacrylate) (PAA-PETPTA) Janus microspheres with "respiratory" function for controlled release were prepared by polymerization of acrylic acid-ethoxylated trimethylolpropane triacrylate (AA-ETPTA) Janus microdroplets in a continuous oil phase in a simple capillary-based microfluidic device with the assistance of UV radiation. The flow rate ratios of AA and ETPTA phases and surfactant content in the continuous oil phase have a significant effect on the structure of the Janus microspheres. PAA part in the Janus microspheres has respiratory function for loading and release due to the different stimuli responses to different pHs. The hollow structure of PETPTA part with different sizes of opening serves as the host materials for PAA and could control release rate further due to the different opening sizes. The obtained PAA-PETPTA Janus microspheres showed high rhodamine B (RhB) loading of 860 mg g-1 and different controlled-release behavior in water with different pHs. The release rate increases with the increase of pH and the contact area of PAA part with water. The maximum controlled-release time for RhB was about 3 h in water with pH of 5. In addition, the Janus microspheres also showed controlled-release behavior for larger size guests, e.g., 150 nm polystyrene beads, which indicated a wide range of application. The loading and release behaviors for guests, for instance, for RhB, have almost no change even after six times of reuse, which indicated a high stability.
Related Concept Videos
Physiology of Respiration I: Functions of the Respiratory System
Fundamental Processes in Respiration:
Precipitate Formation and Particle Size Control
The obtained precipitate should be either a pure substance of known composition or easily converted to one by a simple process, such as ignition or drying. In addition, the precipitate should be insoluble and easily filterable. In general, filterability...
Transfer Function in Control Systems
To derive the transfer function, consider a general nth-order linear time-invariant...
Cell Size
Surface Area
Cells can take in nutrients and water via diffusion through the plasma membrane itself or through specific channels in the membrane. The area of the membrane surrounding...
Anatomy of Respiratory System II: Lower Respiratory Tract
The Larynx
It is located between the pharynx and the trachea, acts as a passageway for air, and hosts several critical structures, such as the epiglottis, vocal cords, and glottis. The epiglottis acts as a gateway, guiding food to the...
The Respiratory System

