Related Experiment Video
Updated: Feb 6, 2026

Experimental Investigation of the Hierarchical Control in DC Microgrids Using a Real-time Simulator
Published on: February 14, 2025
Improvement in automatic generation control of two-area electric power systems via a new fuzzy aided optimal PIDN-FOI
1Department of Electrical and Electronics Engineering, Maharaja Surajmal Institute of Technology, Janakpuri, New Delhi, India.
Abstract:
Automatic generation control (AGC) executes a vital role to supply quality power in an interconnected power system. To cultivate good quality of power supply via preserving area frequency and tie-line power oscillations following consumer's load demand disturbances, the controller designed for AGC of power system should display excellent disturbance rejection expertise. Hence, in this paper, a maiden attempt is made to propose a fuzzy aided integer order proportional integral derivative with filter-fractional order integral (FPIDN-FOI) controller for AGC of multi-area power systems. A more recent intelligent optimization technique termed as imperialist competitive algorithm (ICA) is fruitfully employed for concurrent tuning of various parameters of the proposed controller. It is observed from the simulation results that the proposed FPIDN-FOI controller outperforms the various existing control strategies and PID/PIDN/FPIDN controller designed in the study for five different power system models. Effect of variation in fractional order value of integral on the system performance is analyzed. A sensitivity analysis is conducted to test the robustness of the designed controller under variations in the system parameters, load demands and existence of the system nonlinearities. It is perceived that the proposed controller is robust and executes adequately under variations in system parameters, random load disturbance patterns and nonlinearities.
Related Concept Videos
Control Systems
At the heart...
Control of Power Flow
Control Systems: Applications
In modern vehicles, control systems manage various functions to enhance performance and safety. The steering wheel and accelerator are primary inputs in a car's control system. The...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Transfer Function in Control Systems
To derive the transfer function, consider a general nth-order linear time-invariant...

