A Feasibility Study on Timber Moisture Monitoring Using Piezoceramic Transducer-Enabled Active Sensing

In recent years, the piezoceramic transducer-enabled active sensing technique has been extensively applied to structural damage detection and health monitoring, in civil engineering. Being abundant and renewable, timber has been widely used as a building material in many countries. However, one of the more challenging applications of timber, in construction, is the potential damage caused by moisture. Increased moisture may cause easier warping of timber components and encourage corrosion of integrated metal members, on top of potentially causing rot and decay. However, despite numerous efforts to inspect and monitor the moisture content of timber, there lacks a method that can provide truly real time, quantitative, and non-invasive measurement of timber moisture. Thus, the research presented in this paper investigated the feasibility of moisture-content monitoring using an active sensing approach, as enabled by a pair of the Lead Zirconate Titanate (PZT) transducers bonded on the surface of a timber specimen. Using a pair of transducers in an active sensing scheme, one patch generated a designed stress wave, while another patch received the signal. While the active sensing was active, the moisture content of the timber specimen was gradually increased from 0% to 60% with 10% increments. The material properties of the timber correspondingly changed under varying timber moisture content, resulting in a measurable differential in stress wave attenuation rates among the different specimens used. The experimental results indicated that the received signal energy and the moisture content of the timber specimens show a parabolic relationship. Finally, the feasibility and reliability of the presented method, for monitoring timber moisture content, are discussed.