Related Experiment Video
Updated: Jan 29, 2026

Analysis and Specification of Starch Granule Size Distributions
Published on: March 4, 2021
Influence of crosslinker amount on the microstructure and properties of starch-based superabsorbent polymers by
Dongling Qiao1, Wenyao Tu1, Zhong Wang1
1Glyn O. Phillips Hydrocolloid Research Centre at HBUT, School of Food and Biological Engineering, Hubei University of Technology, Wuhan, Hubei 430068, China.
Abstract:
This work concerns how crosslinker amount (N, N'-methylene-bisacrylamide) affects the microstructural, absorbent and rheological features of one-step prepared starch-based superabsorbent polymers at a high starch concentration (0.27:1 w/w starch-water). The increased crosslinker amount evidently altered the microstructure and the absorbent and rheological features. Then, the variations in starch-based superabsorbent polymer properties were discussed from a microstructure viewpoint. Particularly, the higher crosslinker quantity rose the crosslinking density and the ratio (GR) of grafted anhydroglucose unit on starch backbone (from 27% to 52%), but short the average polyacrylamide (PAM) chain length (LPAM). These structural features suppressed the chain stretch within starch-based superabsorbent polymer fractal gels (confirmed by smaller Rg value) and promoted the formation of smaller chain networks, thus weakening the water absorption to the starch-based superabsorbent polymer chain networks. Also, the increased GR and reduced LPAM, with lowered chain extension and elevated crosslinking density, probably decreased the flexibility and mobility of chain segments in starch-based superabsorbent polymer gel matrixes. This caused the enhanced robustness and storage modulus of the gels with reduced chain energy dissipation ability.
More Related Videos
07:25Combining Histochemical Staining and Image Analysis to Quantify Starch in the Ovary Primordia of Sweet Cherry during Winter Dormancy
Published on: March 20, 2019
08:52Method to Produce Durable Pellets at Lower Energy Consumption Using High Moisture Corn Stover and a Corn Starch Binder in a Flat Die Pellet Mill
Published on: June 15, 2016
Related Concept Videos
Polymers
Polymers
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Rate-Determining Steps
In a multistep reaction mechanism, one of the elementary steps progresses significantly slower than the others. This slowest step is called the rate-limiting step (or rate-determining step). A reaction cannot proceed faster than its slowest step, and hence, the rate-determining step limits the overall reaction rate.
The concept of rate-determining step can be understood from the analogy of a 4-lane freeway with a short-stretch of traffic-bottleneck caused due to...
Concentration Cells
Consider the following voltaic cell: