Related Experiment Video
Updated: Jan 27, 2026

07:42
Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material
Published on: December 20, 2024
778
A Simplified Technique to Control Excess Cement Material Underneath Cement-Retained Implant Restorations: Technical
The International Journal of Oral & Maxillofacial Implants
|March 19, 2019
Summary
Excess cement around dental implants can cause complications. Applying liquid petroleum jelly to the peri-implant sulcus after cementation is a simple method to remove excess cement, preventing implant failures.
Area of Science:
- Dental implantology
- Prosthodontics
- Biomaterials
Background:
- Subgingival cement remnants are a known risk factor for peri-implantitis and implant failure.
- Current methods for excess cement removal can be technique-sensitive and may not be fully effective.
- Preventing cement impaction in the peri-implant sulcus is crucial for long-term implant success.
Purpose of the Study:
- To present a simple, universal, and user-friendly technique for managing excess cement during the cementation of implant-supported restorations.
- To provide practical advice for clinicians to minimize the risk of cement-related implant complications.
Main Methods:
- A technical report describing a method involving the application of liquid petroleum jelly to the peri-implant sulcus.
- The petroleum jelly acts as a barrier and facilitates the easy removal of excess cement after seating the restoration.
Main Results:
- The described method effectively eliminates excess cement from the peri-implant sulcus.
- The technique is straightforward to implement in daily dental practice.
- Minimizing subgingival cement reduces the potential for associated complications.
Conclusions:
- The application of liquid petroleum jelly is a highly effective and simple strategy for managing excess cement around implant-supported restorations.
- This technique should be considered for routine use in clinical practice to enhance implant survival rates and patient outcomes.
Related Concept Videos
Hydration of Cement
896
Hydration of cement is a chemical reaction between cement particles and water. This process occurs primarily through two mechanisms: through-solution and topochemical. In the through-solution process, anhydrous compounds dissolve into their constituents, hydrates form in the solution, and then precipitate from the supersaturated solution. The topochemical process involves solid-state reactions at the cement particle surface. The through-solution process dominates the topochemical process at the...
896
Soundness of Cement
559
The soundness of cement refers to the ability of cement paste to retain its volume after setting. Unsound cement can lead to expansion and structural damage due to the presence of free lime, magnesia, and calcium sulfate. Free lime hydrates very slowly, expanding and causing unsoundness, which is difficult to detect because it intercrystallizes with other compounds. Magnesia also reacts with water, forming crystals that can disrupt the cement's structure. Calcium sulfate can create...
559
Portland Cement
671
Portland cement is the essential binding ingredient in concrete, made from finely ground materials including lime, iron, silica, and alumina. Lime is derived primarily from limestone, marble, marl, seashells, and clays, which also supply iron and alumina, while silica is sourced from sand, chalk, and bauxite. Contemporary manufacturing of Portland cement is a significant source of carbon dioxide emissions, prompting research into reducing its content in concrete through alternative...
671
Fineness of Cement
507
The fineness of cement directly influences the rate of hydration, as the hydration begins at the surface of the cement particles. In addition to hydration, the fineness of cement is vital for various properties of concrete including workability, gypsum requirement, and long-term behavior. The fineness of cement is represented in terms of the specific surface of cement which is typically measured in square meters per kilogram, with several methods available for this determination.
Direct...
Direct...
507
Strength of Cement
486
Strength tests for cement are not performed directly on neat cement paste due to difficulty in obtaining consistent, reliable specimens. Instead, cement is typically tested in the form of cement-sand mortar.
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
486
Types of Cement I
374
Portland cement comes in several types, each with distinct properties and applications based on their chemical composition and hydration characteristics:
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...
Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...
374

