Direct Growth of Graphene on Insulator Using Liquid Precursor Via an Intermediate Nanostructured State Carbon

Pramoda K Nayak1

  • 1Department of Physics, Indian Institute of Technology Madras, Chennai, 600036, India. pnayak@iitm.ac.in.

Related Concept Videos

Insulation Coordination01:23

Insulation Coordination

Insulation coordination is the process of matching electric equipment's insulation strength with protective device characteristics to protect the equipment against expected overvoltages. This selection is based on engineering judgment and cost. Equipment can generally withstand short-duration high transient overvoltages, but repeated tests with identical waveforms can yield inconsistent results. As a result, standard impulse voltage waveforms are used for testing, defined by specific times...
561
Conductors and Insulators01:19

Conductors and Insulators

Some materials may easily let electrical charges pass through them, while others obstruct their flow. The former are called conductors and the latter insulators. The atomic structures of materials determine whether they are conductors or insulators of electricity.
Most metals are conductors. Their atomic configuration is such that one or more electron(s) are loosely bound to the nucleus in each atom. Thus, a sea of mobile electrons are available in them, known as free electrons. Their easy...
10.6K
Microbial Growth Measurement: Direct Methods01:23

Microbial Growth Measurement: Direct Methods

Direct methods for measuring microbial populations in a culture are essential tools in microbiology, providing quantitative data for various applications. Among these, microscopic counts, plate counts, and serial dilution are widely used techniques, each with unique principles and applications.Microscopic CountsMicroscopic counting involves the use of a Petroff-Hausser chamber, a specialized microscope slide with a grid and defined depth. By observing a liquid culture under a microscope,...
1.7K
Thermal Insulation in Masonry Walls01:22

Thermal Insulation in Masonry Walls

In hot, dry climates, the thermal mass of masonry walls can be beneficial, absorbing heat during the day and releasing it at night, thereby stabilizing indoor temperatures. However, in most other climates, additional insulation is necessary to enhance thermal resistance.
External insulation can be applied using an Exterior Insulation and Finish System (EIFS), which involves affixing panels of plastic foam to the wall and covering them with a polymeric stucco reinforced with glass fiber mesh....
530
Disassembly of Intermediate Filaments01:35

Disassembly of Intermediate Filaments

Intermediate filaments (IFs) do not undergo spontaneous disassembly. Enzymes, kinases, and phosphatases add and remove phosphates from specific sites to regulate their disassembly. The IF concentration in the cytoplasm also regulates the disassembly. If the concentration crosses a threshold, it activates the protein kinases in the vicinity, allowing the phosphorylation of IFs.
Keratin proteins, found at the cell periphery near cell junctions, undergo a cycle of assembly and disassembly. In Type...
2.6K
Types of Intermediate Filaments01:31

Types of Intermediate Filaments

The intermediate filaments are an essential component of the cytoskeleton. Presently six types of intermediate filament have been identified. Type I and II are acidic and basic keratin proteins. Type III is of mesodermal origin and comprises four proteins: vimentin, desmin, glial fibrillary acidic protein (GFAP), and peripherin. Vimentin is commonly found in mesenchymal cells, desmin in muscle cells, GFAP in astrocytes, while peripherin is found in peripheral nervous system neurons (PNS). Type...
4.8K