Bandwidth extension of narrowband-signal intensity calculation using additive, low-level broadband noise

Calculation of acoustic intensity using the phase and amplitude gradient estimator (PAGE) method has been shown to increase the effective upper frequency limit beyond the traditional p-p method when the source of interest is broadband in frequency [Torrie, Whiting, Gee, Neilsen, and Sommerfeldt, Proc. Mtgs. Acoust. 23, 030005 (2015)]. PAGE processing calculates intensity for narrowband sources without bias error up to the spatial Nyquist frequency [Succo, Sommerfeldt, Gee, and Neilsen, Proc. Mtgs. Acoust. 30, 030015 (2018)]. The present work demonstrates that for narrowband sources with frequency content above the spatial Nyquist frequency, additive low-level broadband noise can improve intensity calculations. To be effective, the angular separation between the source and additive noise source should be less than 30°, while using phase unwrapping with a smaller angular separation will increase the usable bandwidth. The upper frequency limit for the bandwidth extension depends on angular separation, sound speed, and probe microphone spacing. Assuming the signal-to-additive-noise ratio (SNR_a) is larger than 10 dB, the maximum level and angular bias errors incurred by the additive broadband noise beneath the frequency limit-or up until probe scattering effects must be taken into account-are less than 0.5 dB and 2.5°, respectively. Smaller angular separation yields smaller bias errors.