Related Experiment Video
Updated: Jan 23, 2026

Characterization of Electrode Materials for Lithium Ion and Sodium Ion Batteries Using Synchrotron Radiation Techniques
Published on: November 11, 2013
Si Nanoparticles Coated with Co-Containing N-Doped Carbon: Preparation and Characterization as Li-Ion Battery Anode
Sung-Yun Lee1, Seong-In Kim2, Sukeun Yoon1
1Division of Advanced Materials Engineering & Institute for Rare Metals, Kongju National University, Chungnam 31080, Republic of Korea.
Abstract:
Si nanoparticles uniformly coated with Co-containing N-doped carbon were investigated as an anode material for Li-ion batteries. The Si nanoparticle surfaces were modified with conductive and matrix, N-doped carbon and cobalt element and prepared by a simple pyrolysis process using an ionic liquid that contained nitrogen with metal complex. After a simple annealing process, the N-doped carbon containing cobalt element was uniformly coated onto the Si nanoparticles. The smooth carbon layer connected the Si nanoparticles without any morphological changes. Si nanoparticles containing 34 wt% N-doped carbon and cobalt element exhibited a stable electrochemical performance with a capacity of ~1133 mAh g-1 and excellent capacity retention over 60 cycles. The high electrochemical performances was attributed to the synergistic effect by presence cobalt in N-doped carbon matrix, which alleviated the lithium-silicon alloying reaction-induced volume expansion and enhanced electrical conductivity during cycling.
Related Concept Videos
Batteries and Fuel Cells
The Carbon Cycle
DC Battery
Common Ion Effect
Precipitation of Ions
The equation that describes the equilibrium between solid calcium carbonate and its solvated ions is:
Ion Channels
Ion channels are specialized integral membrane proteins on the plasma membrane that allow...

