Comparison of depth cameras for three-dimensional reconstruction in medicine

KinectFusion is a typical three-dimensional reconstruction technique which enables generation of individual three-dimensional human models from consumer depth cameras for understanding body shapes. The aim of this study was to compare three-dimensional reconstruction results obtained using KinectFusion from data collected with two different types of depth camera (time-of-flight and stereoscopic cameras) and compare these results with those of a commercial three-dimensional scanning system to determine which type of depth camera gives improved reconstruction. Torso mannequins and machined aluminium cylinders were used as the test objects for this study. Two depth cameras, Microsoft Kinect V2 and Intel Realsense D435, were selected as the representatives of time-of-flight and stereoscopic cameras, respectively, to capture scan data for the reconstruction of three-dimensional point clouds by KinectFusion techniques. The results showed that both time-of-flight and stereoscopic cameras, using the developed rotating camera rig, provided repeatable body scanning data with minimal operator-induced error. However, the time-of-flight camera generated more accurate three-dimensional point clouds than the stereoscopic sensor. Thus, this suggests that applications requiring the generation of accurate three-dimensional human models by KinectFusion techniques should consider using a time-of-flight camera, such as the Microsoft Kinect V2, as the image capturing sensor.