Distributed fault detection and estimation in cyber-physical systems subject to actuator faults
Dezhi Xu1, Fanglai Zhu2, Zepeng Zhou2
1School of Internet of Things Engineering, Jiangnan University, Wuxi, 214122, China.
Abstract:
The fault detection and estimation problems for the physical layer network in the cyber-physical systems with unknown external disturbances are investigated in this study. Both bias fault and loss of efficiency scenarios are considered for the actuators. Based on the adaptive threshold method and sliding mode observer approach, a distributed fault detection observer (DFDO) is constructed for each physical layer node to detect the occurrence of actuator faults. Then a relative global estimation error system is defined for the distributed fault estimation observer (DFEO). Compared with the existing results, the proposed DFEO can provide the estimation for not only the actuator bias faults but also the actuators' efficiency factors under the impact of exogenous disturbance with two gain dynamic update processes. Finally, the feasibility and effectiveness of the given DFDO and the DFEO are examined by Lyapunov stability method and the simulation results.
Related Concept Videos
Power System Three-Phase Short Circuits
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Fault Types
For line-to-line faults occurring between phases B and C, the...
Bus Impedance Matrix
In the first circuit, all machine voltage sources are short-circuited, leaving only the prefault voltage source at the fault location. The positive-sequence bus impedance matrix can be determined by solving the nodal equations,...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
Three-Phase Short Circuit—Unloaded Synchronous Machine
This behavior occurs due to the magnetic flux produced by the short-circuit armature currents. Initially, these currents follow high-reluctance paths but eventually shift to...


