Energy saving and Fuzzy-PID position control of electro-hydraulic system by leakage compensation through proportional...

In this article, the focus is on the energy efficiency along with the position control of the linear actuator used in heavy earth moving equipment. It is quite evident that linear actuators are one of the critical machinery components used in the construction and mining activities like in booms of excavation equipment. The proposed work employed two different hydraulic circuits and a contrast has been carried out in terms of the energy efficiency. In one hydraulic circuit, the conventional proportional directional control valve (PDCV) is used for the position control. In another one, an innovative solution of using proportional flow control valve (PFCV) by creating artificial leakage between the two ends of the actuator is evaluated according to its energy efficiency. The extra flow coming from the pump during position control is by-passed by PFCV rather than the pressure relief valve in PDCV. This reduces the energy loss in the form of heat and increases the efficiency of the hydraulic circuit. The simulation of the hydraulic circuit is performed using MATLAB/Simulink and results are compared with the experiments and it is found that hydraulic circuit using PFCV is 8.5% more energy efficient than the conventional circuit using PDCV. The position control of the actuator is done using PID controller tuned by the fuzzy controller.