Related Experiment Video
Updated: Dec 27, 2025

Fabrication of a Solution-gated Indium-Tin-Oxide-based One-piece Transistor Enabling Sensitive Biosensing
Published on: August 29, 2025
Recessed-Gate GaN Metal-Insulator-Semiconductor High-Electron-Mobility Transistor Using a Dual Gate-Insulator
Jun Hyeok Jung1, Min Su Cho1, Won Douk Jang1
1School of Electronics Engineering, Kyungpook National University, Daegu, 41566, South Korea.
Abstract:
In this work, we present a normally-off recessed-gate AlGaN/GaN metal-insulator-semiconductor high-electron-mobility transistor (MIS-HEMT) using a TiO₂/SiN dual gate-insulator. We analyzed the electrical characteristics of the proposed device and found that the dual gate-insulator device achieves higher on-state currents than the device using a SiN gate-insulator because the high-k insulator layer of the dual gate-insulator improves the gate-controllability. The device using a TiO₂/SiN gate-insulator shows better gate leakage current characteristics than the device with only TiO₂ gate-insulator because of the high quality SiN gate-insulator. Therefore, the device using a dual gate-insulator can overcome disadvantages of a device using only TiO₂ gate-insulator. To better predict the power consumption and the switching speed, we simulated the specific on-resistance (R) according to the gate-to-drain distance (LGD) using the two-dimensional ATLAS simulator. The proposed device exhibits a threshold voltage of 2.3 V, a maximum drain current of 556 mA/mm, a low R of 1.45 mΩ·cm², and a breakdown voltage of 631 V at an off-state current of 1 μA/mm with VGS = 0 V. We have confirmed that a normally-off recessed-gate AlGaN/GaN MIS-HEMT using a TiO₂/SiN dual gate-insulator is a promising candidate for power electronic applications.
Related Concept Videos
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Metal-Semiconductor Junctions
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Field Effect Transistor

