Related Experiment Video
Updated: Dec 26, 2025

Atomic Layer Deposition of Vanadium Dioxide and a Temperature-dependent Optical Model
Published on: May 23, 2018
Adsorption-desorption and co-migration of vanadium on colloidal kaolinite
Jin-Yan Yang1,2, Hou-Qiao Luo1, Yan-Yuan Zhu1
1College of Architecture and Environment & Healthy Food Evaluation Research Center, Sichuan University, Chengdu, 610065, China.
Abstract:
Vanadium (V) pollution in soil has been widely noted, while knowledge about the effect of soil colloid on migration of V is scarce. Batch adsorption-desorption and transportation of the colloid-adsorbed V in columns packed with quartz sand under various environment conditions were carried out to explore the retention and transportation of V by colloidal kaolinite. Batch adsorption-desorption studies show that the adsorption of V by the colloidal kaolinite was mainly specific adsorption and redox played a limited role in the adsorption process. The maximum adsorption capacity of the colloidal kaolinite was 712.4 mg g-1, and about 5.9-8.7% of the adsorbed V could be desorbed. Both the adsorption-desorption and migration of V with colloidal kaolinite were highly ambient condition dependent. The column studies show that V was highly mobile in the saturated porous media. An easier transfer of V with an increase in pH, IS, and velocity of flow was noted. However, the increase of IS lead to the blockage of the colloidal kaolinite transportation. The recovery rate of the colloidal kaolinite at pH 7 and 9 was 2.0 and 2.1 times that at pH 5, respectively. The migration of colloidal-adsorbed V in sand column preceded that of V ion, but more colloidal-bound V than V ion remained in the column. Lack of consideration of the combination and co-transportation of V and colloidal kaolinite will lead to an overestimation of the risk of V to deeper soil profiles and groundwater. Graphical abstract.
More Related Videos
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
Related Concept Videos
Colloidal precipitates
Coagulation
Volatilization
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Colloids and Suspensions