Numerical Simulation and Experimental Research on Temperature Distribution of Fillet Welds

In this paper, a matrix equation for the welding heat source model was proposed to calculate the fillet welds temperature distribution based on the penetration depth and molten width. A double ellipsoid heat source model of fillet weld was established firstly by physical experiment and simulation calculation, and then the orthogonal experiment was constructed based on the previous calculation methods and experimentally measured data. Finally, the matrix equation of the heat source model parameters was obtained by regression analysis based on the joint penetration and width. The experimental and numerical simulation of the temperature distribution had been performed for the fillet weld and the results show that (1) the heat flux increases in one direction, while, oppositely, it decreased in another direction; (2) simulation results were highly in accordance with experiments results. The results indicated that the double ellipsoidal heat source model calculated by the matrix equation is quite appropriate for predicting the transient temperature distribution on the fillet welds for the gas metal arc welding process.