Related Experiment Video
Updated: Dec 22, 2025

Fizzy Extraction of Volatile Organic Compounds Combined with Atmospheric Pressure Chemical Ionization Quadrupole Mass Spectrometry
Published on: July 14, 2017
Online Scavenging of Trace Analytes in Complex Matrices for Fast Analysis by Carbon Dioxide Bubbling Extraction
Yuanji Gao1, Bing Xia2, Yunan Qin1
1College of Chemistry and Materials Science, Sichuan Normal University, Chengdu 610068, P.R. China.
Abstract:
Carbon dioxide (CO2) microbubbles can selectively enrich organic solutes from sea spray aerosols. Common bubbling extractions are normally followed by off-line separation/detection through methods such as mass spectrometry, chromatography, and spectroscopy. However, it is necessary to establish extractions with online separation and identification systems to improve efficiency and minimize sample loss. In this study, CO2 is used to form microbubbles in the sample solution, and trace analytes in the solution are transported to the gas phase by bubble bursting. Analytes at the liquid-gas interface are directly released into the trapping device, followed by thermal desorption for gas chromatography-mass spectrometry. For polycyclic aromatic hydrocarbons, the dependence of the extraction efficiency on various parameters has been analyzed. The method reported here provides high efficiency and minimizes the loss of trace volatiles with a better signal strength and signal-to-noise ratio than other gases. These features make the proposed method a rapid method to detect and quantify volatile/semivolatile analytes in complex liquid matrices. In addition to the preconcentration of organics, metal ions, and inorganic anions, a noticeable decrease of metal-organic compounds in the aqueous solution was shown for the first time. We finally propose a simple model of chemical partitioning in CO2 bubbling extraction of liquid samples for guiding online monitoring of trace analytes in real-world samples.
More Related Videos
Related Concept Videos
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Mass Spectrometry: Complex Analysis
GC–MS is a powerful hyphenated method commonly used in forensics and environmental...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...

