Related Experiment Video
Updated: Dec 13, 2025

Measurement of Chladni Mode Shapes with an Optical Lever Method
Published on: June 5, 2020
Chladni Figures in Modal Analysis of a Double-Panel Structure
Jaroslaw Rzepecki1, Anna Chraponska1, Sebastian Budzan1
1Department of Measurements and Control Systems, Silesian University of Technology, Akademicka 16, 44-100 Gliwice, Poland.
Abstract:
Analysis of the structural vibration, under the sound excitation is an important part of the quality assurance during the design process of devices. One of the most commonly used method is Laser Doppler Vibrometry (LDV). However, under the rapid fluctuations of temperature, structural resonances are shifted into the other frequencies. In such situation LDV method may be inconvenient, due to the scanning time. In this paper the authors proposed Chladni figures to modal analysis of the double-panel structure, excited by the loudspeaker enclosed inside the casing with a rigid frame. Double-panel structure has been proven to be particularly useful for noise and vibration reduction applications. Vision images, obtained during the experiments are converted to binary patterns, using GLCM matrix, and compared with simulations performed in ANSYS.
More Related Videos
Related Concept Videos
Method of Sections: Problem Solving I
Method of Sections
Shear and Bending Moment Diagram: Problem Solving
Draw a Free-Body Diagram: Start by drawing a free-body diagram of the entire beam, including the concentrated loads, distributed load, and reaction...
Method of Sections: Problem Solving II
Internal Loadings in Structural Members: Problem Solving
To illustrate this, let's consider a beam OC of 5 kN, inclined at an angle of 53.13° with the horizontal and supported at both ends. Determine the internal...
Bending of Members Made of Several Materials
Hooke's Law determines stress in each material, stating that stress is proportional to strain but varies due to each material's...

