Crystalline phase evolution and thermal behavior of zirconia-lanthanum aluminate ceramics produced by surface...

The purpose of the present work was to investigate the effect doping with lanthanum aluminate on the phase assemblage and thermal behavior of zirconia ceramics for biomedical applications. Four compositions were prepared by a surface modification route of either conventional tetragonal zirconia (3Y-TZP) or high translucency cubic-based zirconia (5Y-PSZ) to reach a nominal composition of either 0.5 wt. % (3Y-0.5LAO and 5Y-0.5LAO) or 5 wt. % of lanthanum monoaluminate (3Y-5LAO and 5Y-5LAO). Undoped powders were used as controls. DTA and XRD analyses revealed that lanthanum dizirconate crystallized in the 934°C-936°C range, while lanthanum aluminate crystallized in the 1,056°C-1,063°C range in both types of zirconias doped at the 5% level. No second phase was found in compositions doped at the 0.5% level. The a lattice parameter and the amount of the cubic phase increased in both 3Y-5LAO and 5Y-5LAO. The microstructure of the compositions doped with 5% LAO was characterized by well distributed LAO twinned crystals and sparse needle-shaped lanthanum hexaaluminate crystals. A bimodal grain size distribution was observed in 5Y-doped compositions. This was attributed to abnormal grain growth of the cubic phase, and in line with aluminum segregation at grain boundaries and the presence of second-phase LAO crystals.