Improved Design via Simulation of Micro-Modified PVDF and its Copolymer Energy Harvester with High Electrical Outputs

In this work, micro-modified polyvinylidene fluoride (PVDF) and its copolymer poly(vinylidene-trifluoroethylene) (P(VDF-TrFE)) with salient enhancement in current output are demonstrated. The influence of surface-modified structure characteristics on electrical properties of energy harvester is systematically analyzed based on the finite element method. For vertical load mode, eight structures consisting of banded and disjunctive groups are compared to evaluate the voltage performance. The cylinder is proved to be the best structure of 3.25 V, compared to the pristine structure of 0.99 V (P(VDF-TrFE)). The relevant experiment has been done to verify the simulation. The relationship between radius, height, force and distance to the voltage output of the cylinder allocation is discussed. For periodical changing load mode, the cylinder modified structure shows a conspicuous enhancement in current output. The suitable resistance, current-voltage and frequency, the relationship between loading speed and current, and the ductility of current loading are studied. For 30 kHz, the peak current is 20 times larger than the flat plate structure. Tip shape mode and fusiform shape mode are found, which show the different shapes of the peak current-frequency curves. Four electrical loading circuit properties are also discussed: the suitable resistance of the system, synchronism of current and voltage, time delay nature of energy harvester and current-loading relationship. The simulation results can provide some theoretical basis for designing the energy harvester and piezoelectric nanogenerator (PENG).