Data on bond strength of methyl methacrylate-based resin cement to dental restorative materials

A methyl methacrylate (MMA) -based resin cement is one of the popular luting agents to bond a dental restorative material in dental treatments. Bond strength of the MMA-based resin cement with adhesive primer to each restorative material is important for clinical success in prosthodontic treatments without debonding or fracture failures of the restoration such as a dental crown and post. However, open data on the bonding properties of combined use of the MMA-based resin cement and appropriate primers is limited. This article provides data on the bond strength and fracture mode of the 4-META/MMA-TBB resin cement (MMA-based resin cement) to the restorative materials (silver alloy, gold alloy, feldspathic porcelain, and zirconia) with four types of primer. Each restorative material was applied with the adhesive primer and bonded with the MMA-based resin cement. The cement-bonded samples were subjected to a thermocycling in which the materials were immersed alternately in water baths at 5 °C and 55 °C for 10,000 cycles. The bond strength between the resin cement and each restorative material was measured by means of a conventional tensile bond strength test. The fracture modes of the examined samples were observed and determined. The measured tensile bond strengths were statistically analysed using one-way analysis of variance (ANOVA), followed by Tukey's multiple comparison test.