Related Experiment Video
Updated: Dec 1, 2025

Synthesis of Graphene Nanofluids with Controllable Flake Size Distributions
Published on: July 17, 2019
Rheological and tribological characterization of novel modified graphene/oil-based nanofluids using force microscopy
1Faculty of Engineering, Bioengineering Department, Bilecik Seyh Edebali University, Bilecik, Turkey.
Abstract:
In this study, it is aimed to improve the lubrication and anti-wear characteristics of nanofluids produced by the distribution of silane-modified graphene nanosheets into the base oil without any surfactant or dispersant. Nanofluids are among the hottest research topics currently studied in the literature due to their interesting thermal and rheological properties. Graphene nanosheet with unique physicochemical properties is a good alternative as a nanofluid component and a lubricant. In this study, the behavior of nanofluidic films on the material was investigated by using scanning probe techniques, phase-contrast microscopy, and friction force microscopy techniques. Due to stick-slip behavior and rheological properties that are dominant in the studied ranges, problems were encountered in performing tribological analyzes with friction force microscopy. On the other hand, these results have been beneficial in determining tribological factors in nanoscale. The presented nanofluids showed non-Newtonian behavior at high concentrations and shear rates and shown an improved tribological performance up to 43% in friction coefficient, 91% in wear, and 46% in thermal conductivity compared to the base oil.
More Related Videos
Related Concept Videos
Design Example: Deciding Thickness of Lubricating Fluid in a Shaft
To calculate the required thickness of the lubricant layer, the tangential velocity at the shaft's surface must first be determined. This velocity is calculated by converting the rotational speed to angular velocity...
Characteristics of Dry Friction
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...

